Join our Mailing List    

Your ultimate source for explosion-proof air conditioners, building pressurization units, gas phase filtration systems, and fully integrated wall, pad and split system hazardous and industrial climate control solutions!
Products Services Contacts Us About Us
News      Testimonials
Introduction Product Applications Unit Case Styles & Materials Unit Configurations Standard Features Optional Features Specs, Certification & Warranty Unit Accessories Technical Bulletins Model Number Matrix On-Line Inquiries

Marine Rated Wall & Remote Mount NFPA 496 Building Pressurization Units

Model WDP & RDP
Wall & Remote Mount NFPA 496
Building Pressurization Units

Unit Accessories

explosion-proof building pressurization units, hazardous location building pressurization units, classified area explosion proof building pressurization units

Remote Alarm Beacons & Horns

Bebco provides these accessories for Bebco Whisper Drive™ Pressurization Units to indicate that building or room pressure is below
the alarm set point. In tandem, the VFDI Card permits you to set an alarm pressure and an alarm delay to prevent nuisance alarms.

These alarm devices can be mounted on or near the protected building or room, are rated for the Hazardous Location and are
also perfect companions to our Gas Detection Systems, to provide alarms for combustible or corrosive gases and oxygen deficiency.

Bebco provides all necessary accessories to complete your installation easily!

Hazardous Location Enclosure Air Conditioner Remote Alarm Beacons & Horns

Click these images to learn more!


Hazardous Location Enclosure Air Conditioner Remote Alarm Beacons & Horns

Bebco Remote Alarm Beacons & Horns
provide visual and audible signals that
summon operators to critical fault conditions!

Area Classification Ratings
for each device vary...

Please see our Technical Bulletin for complete information or contact a
Bebco Sales Associate
for assistance!

Model ERAB, RAB & RAH
Remote Flashing Alarm Beacons & Audible Tone Horns
Provide visual and audible signals to summon Operators to fault conditions

 







 
 
 


 
 

 





 
 


 
 







 

 








 
 


 
 










ERAB-2
Materials:

Mounting:
Dimensions:
Shipping Weight:
Operating Temp:
Operating Voltage:

 
 
Flash Rate:
Certifications:
 
RAB-2
Materials:

Mounting:
Dimensions:
Shipping Weight:
Operating Temp:
Operating Voltage:
 
 
Flash Rate:
Certifications:
 
RAH-2
Material:
Mounting:
Dimensions:
Shipping Weight:
Operating Temp:
Maximum Sound:
Operating Voltage:
 
Certification:

RAB-1
Materials:

Mounting:
Dimensions:
Shipping Weight:
Operating Temp:
Operating Voltage:
 
 
Flash Rate:
Certifications:
 
RAH-1
Material:
Mounting:
Dimensions:
Shipping Weight:
Operating Temp:
Maximum Sound:
Operating Voltage:
 

Certification:
Economy Remote Alarm Beacon
Aluminum Housing w/ Polyurethane Finish
& Polycarbonate Outer Dome
Pendant w/ 3/4" Conduit
7.5” H x 5.5” Diameter
2 Pounds
-40° F - 104° F
12-24 VDC @ 1.70-0.70 Amps
24 VDC @ 0.70 Amps
120 VAC @ 0.21 Amps
240 VAC @ 0.13 Amps
80 / Minute
Class I, Div 2 - UL Listed, CSA Certified
 
Flashing Remote Alarm Beacon
Cast Aluminum Body with Epoxy Finish
& Glass Dome w/ Optional Guard
Pendant or Ceiling w/ 3/4" Conduit
9.25” H x 5.5” Diameter
5 Pounds
-31° F - 104° F
24 VDC @ 0.4 Amps
120-240 VAC @ 0.21-0.13 Amps
277 VAC @ 0.13 Amps
60 / Minute or Steady Burn
Class I, Div 2 - UL Listed, CSA Certified
 
Continuous Tone Remote Alarm Horn
Die Cast Zinc w/ Polyurethane Finish
Surface w/ 3/4" Conduit
4.53” H x 6.02” W x 3.66” D
3 Pounds
-65° F - 150° F
100 Decibels at 10 ft.
120VAC 50/60Hz @ 0.18 amps
240VAC 50/60Hz @ 0.09 amps
Class I, Div 2 - UL Listed, CSA Certified

Div 1 Flashing Remote Alarm Beacon
Cast Aluminum Body with Epoxy Finish
& Glass Dome w/ Optional Guard
Pendant, Wall or Ceiling Mount w/ 3/4 Conduit
14.26" - 15.48" H x 8.80” Diameter
15.9 -19.8 Pounds
-67° F - 150° F
24 VDC @ 1.9 Amps
120 VAC 50/60 Hz @ 1.14 Amps
240 VAC 50/60 Hz @ 1.14 Amps
80 / minute
Class I, Div 1 - UL Listed, CSA Certified
 
Div 1 Continuous Tone Remote Alarm Horn
Cast Aluminum Body
Pendant or Surface w/ 3/4" Conduit
7.625” H x 6.875” D x 6.5” D
12 Pounds
-13° F - 104° F
100 Decibels at 10 ft. (5 minute duty cycle)
24 VDC @ 1.2 Amps
120 VAC 50/60 Hz @ 0.20 Amps
240 VAC 50/60 Hz @ 0.10 Amps
Class I, Div 1 - UL Listed, CSA Certified
Open this Accessory’s Technical Bulletin in a separate window!



Bebco Environmental Controls Corporation
Physical Address: 4725 Lawndale Street, La Marque, Texas 77568
Mailing Address: P.O. Box 68 Hitchcock, Texas 77563
Phone: (844) 397-4822     |   Fax: (409) 935-5819
Office Hours:
 8 AM to 5 PM CST, Monday - Friday
Please visit this site for NFPA 496 UL Classified Enclosure Purging Systems:
Best Purging Systems Corporation

  |     |     |  
Terms of Use   |     |   Privacy Policy   |   Terms of Sale
Product Warranties   |   Return Policy & Form   |   Product Registration Form   |   Site Map

Copyright © 2019 – All Rights Reserved      Click the Terms of Use Link above for more information.