Join our Mailing List    

Your ultimate source for explosion-proof air conditioners, building pressurization units, gas phase filtration systems, and fully integrated wall, pad and split system hazardous and industrial climate control solutions!
Products Services Contacts Us About Us
News      Testimonials
Introduction Product Applications Case Styles & Materials Unit Accessories Model Number Matrix On-Line Inquiries

America's Best Wall Mount Air Conditioners & Heat Pumps

Model PAC & PHP
Packaged & Pad Mount
Air Conditioners & Heat Pumps

Model Number Matrix

The Model Number Segments below specify standard features and options for our Wall Mount Air Conditioners & Heat Pumps.
Please note certain aspects of this extremely detailed product's model number are determined at time of specification development
as noted, and limitations to various selections apply as indicated by an asterisk and model number selection note number.

Click question symbols below for more information on any particular item.


Typical Model Number:

1 - Case Style & Material *1
EC Economy Grade Galvannealed Steel
CS Commercial Grade 304 Stainless Steel
CX Commercial Grade 316 Stainless Steel
 
2 - Discharge & Compressor Configurations
  Segment A: Discharge Configuration
P End (standard) S Side B Bottom
  Segment B: Compressor Configuration
AC Reciprocating or Standard Scroll Compressor
DC Digital Scroll Compressor
HP Heat Pump Compressor
 
3 - Style & Cooling Capacity
  Segment A: Unit Style
S Single D Dual R Redundant
  Segment B: Cooling Capacity
01.0 1.0 Ton 06.0 6.0 Tons 20.0 20.0 Tons
01.5 1.5 Tons 07.5 7.5 Tons 22.0 22.0 Tons
02.0 2.0 Tons 08.5 8.5 Tons 25.0 25.0 Tons
03.0 3.0 Tons 10.0 10.0 Tons 30.0 30.0 Tons
04.0 4.0 Tons 12.5 12.5 Tons 40.0 40.0 Tons
05.0 5.0 Tons 15.0 15.0 Tons 50.0 50.0 Tons
   - contact us regarding other Tonnage Ratings
 
4 - Integrated Pressurization or Ventilation Blowers *2
N Excluded - use this digit to exclude feature
or select from each segment below
  Segment A: Blower Configuration
S Single D Dual R Redundant
  Segment B: Blower Type
V Variable Speed Pressurizer
C Constant Speed Pressurizer
S Single Speed Ventilator
A Adjustable Speed Ventilator
E Automatic Emergency Ventilator
F Manually Activated Emergency Ventilator
  Segments C-F: Blower Location, Size & CFM,
& Motor HP, Voltage, Phase & Hertz.
  Determined at time of specification development
 
5 - Fresh Air Intake *3
N Excluded - use this digit to exclude feature
or consult a Bebco Sales Associate for more information.
  Segment A: Intake Housing Location
L Left Side R Right Side
T Top E End (Opposite Discharge End)
  Segments B-D: Housing & Damper Styles & Filter Type
  Determined at time of specification development
 
6 - Gas Phase Filtration System *4
N Excluded - use this digit to exclude this feature
or select from each segment below
  Segment A: Filtration Media
1 Deep Bed Adsorbent
2 Single Pass Adsorbent Media Cells
3 Double Pass Adsorbent Medial Cells
4 Single Pass Activated Carbon Honeycomb Cartridges
5 Double Pass Activated Carbon Honeycomb Cartridges
6 Triple Pass Activated Carbon Honeycomb Cartridges
  Segment B: Filtered Air
A Fresh Air Only
B Recirculated Air Only
C Fresh & Recirculated Air
 
7 - Operating Voltage (described as Voltage-Phase-Hertz) *3
Z 120-1-60 D 220/240-1-50 H 208-1-60
A 208/230-1-60 E 200/220-3-50 I 230-1-60
B 208/230-3-60 F 380/415-3-50 J 208-3-60
C 460-3-60 G 575-3-60 K 230-3-60
     - contact us regarding other Voltages L 480-3-60
 
8 - Unit Compartment Classifications
  1st digit indicates Interior Space Classification for Evaporator Unit
2nd digit indicates Exterior Area Classification for Condenser Unit
G General Purpose (Unclassified)
1 Class I, Div. 1, Gr. C,D / Zone 1, Gr. IIB
2 Class I, Div. 2, Gr. B,C,D / Zone 2, Gr. IIB+H2
3 Class I, Div. 2, Gr. C,D / Zone 2, Gr. IIB
4 Class I, Div. 2, Gr. ABCD / Zone 2, IIC
5 Class II, Div. 1, Gr. E,F,G / Zone 21
6 Class II, Div. 2, Gr. F,G / Zone 22
7 IEC/ ATEX Ex Zone 2
8 IEC/ ATEX Ex Zone 1
 
9 - Electrical Controls *4
  Segments A-C: Material Specifications, Electrical
Control System, Control Location & Access.
  Determined at time of specification development
 
10 - Operator Interfaces *4
N Excluded - use this digit to exclude this feature
or consult a Bebco Sales Associate for more information.
  Segments A & B: Temperature & Function Controls
& Warning Indicator Styles
  These Interfaces are duplicated on Dual & Redundant Units
and determined at time of specification development
 
11 - Common Interfaces *4
N Excluded - use this digit to exclude this feature
or consult a Bebco Sales Associate for more information.
  Segments A & B: Interface Controls & Warning Indicators
  This Interface applies to Dual & Redundant Units only and is determined at time of specification development
12 - Heating Elements *5
N Excluded - use this digit to exclude this feature
or select from each segment below
  Segment A: Electrical Rating & Components
A OEM Wire Element, Contactor & Snap Action Switch
B Unclassified Wire Element, Contactor & Snap Action Switch
C Div. 2 Fin Tube, Contactor & Snap Action Switch
D Div. 2 Flat Bar, Contactor & Snap Action Switch
E Div. 2 Flat Bar, Solid State Relay & Snap Action Switch
F Div. 2 Flat Bar, Solid State Relay & Smart Temp. Regulator
U Custom Heating Element
  Segment B: Kilowatt Rating
03.0 3.0 kW 09.0 9.0 kW 20.0 20.0 kW
04.0 4.0 kW 10.0 10.0 kW 24.0 24.0 kW
04.5 4.5 kW 12.0 12.0 kW 30.0 30.0 kW
05.0 5.0 kW 12.5 12.5 kW 35.0 35.0 kW
06.0 6.0 kW 15.0 15.0 kW 40.0 40.0 kW
08.0 8.0 kW 17.5 17.5 kW 50.0 50.0 kW
  - contact us regarding other Kilowatt Ratings  
 
13 - Coil Materials, Coil Coatings, Case & Chassis Finishes *6
  Segment A: Evaporator Coil Tube & Fin Materials
A Copper Tubes & Aluminum Fins
C Copper Tubes & Copper Fins
U Custom Tubes & Fin Materials
  Segment B: Evaporator Coil Tube & Fin Coatings
H Heresite® ES-600 Coating
M Modine Insitu® Coating
U Custom Coating
X Excluded
  Segment C: Condenser Coil Tube & Fin Materials
A Copper Tubes & Aluminum Fins
C Copper Tubes & Copper Fins
U Custom Tube & Fin Materials
  Segment D: Condenser Coil Tube & Fin Coatings
H Heresite® ES-600 Coating
M Modine Insitu® Coating
A Adsil Microguard® Coating
U Custom Coating
X Excluded
  Segment E: Case Finish
E Baked Enamel (for EC Case Style only - color may vary)
C Modine® Clear over Baked Enamel (for EC Case Style only)
N 2B Finish (for CS & CX Case Styles only)
G ANSI 61 Gray Sprayed Urethane
S White Sprayed Urethane
T ANSI 61 Gray Epoxy Powder Coated
P White Epoxy Powder Coated
U Custom Finish
  Segment F: Chassis Finish
E Baked Enamel (for EC Case Style only - color may vary)
C Modine® Clear over Baked Enamel (for EC Case Style only)
N 2B Finish (for CS & CX Case Styles only)
H Heresite® ES-600 Coating
M Modine Insitu® Coating
A Adsil Microguard® Coating
G ANSI 61 Gray Sprayed Urethane
S White Sprayed Urethane
T ANSI 61 Gray Epoxy Powder Coated
P White Epoxy Powder Coated
U Custom Finish
 
14 - Air Supply & Return Openings *7
  Segment A: Configuration
A Standard Supply & Return Grilles
B Standard Supply Grille & Smart Return Grille
C Smart Snout w/ Standard Supply & Return Grilles
D Supply Duct Flange & Standard Return Grille
E Supply Duct Flange & Smart Return Grille
F
 
Smart Snout w/ Supply Duct Flange &
Standard Return Grille
U Custom Configuration
X Excluded (no grills or duct flanges furnished)
  Segment B: Supply Grille Material & Finish
1 Anodized Aluminum
2 Galvanneal Steel w/ 13C Case Finish
3 304 Grade Stainless Steel w/ 2B Finish
4 316 Grade Stainless Steel w/ 2B Finish
5 304 Grade Stainless Steel w/ 13E Case Finish
6 316 Grade Stainless Steel w/ 13E Case Finish
U Custom Material & Finish
X Excluded (supply duct flange selected above)
  Segment C: Return Grille Material & Finish
1 Anodized Aluminum
2 Galvanneal Steel w/ matched Case Finish
3 304 Grade Stainless Steel w/ 2B Finish
4 316 Grade Stainless Steel w/ 2B Finish
5 304 Grade Stainless Steel w/ 13E Case Finish
6 316 Grade Stainless Steel w/ 13E Case Finish
U Custom Material & Finish
X Excluded (use Segment D Smart Grille Material)
  Segment D: Smart Grille or Smart Snout Material
2 Galvanneal Steel w/ 13C Case Finish
5 304 Grade Stainless Steel w/ 13E Case Finish
6 316 Grade Stainless Steel w/ 13E Case Finish
U Custom Material & Finish
X Excluded (neither item selected above)
  Segment E: Special Enhancements
A Supply Opening Air Flow Damper
B Return Opening Air Flow Damper
C Supply & Return Opening Air Flow Dampers
D Supply & Return Opening Fire Dampers
E Supply & Return Opening Blast Dampers
U Custom Enhancements
X Excluded
 
15 - Condenser Compartment Air Filters
L Low Density
H High Density
U Custom Air Filters
X Excluded

Please contact us for information regarding any aspect of unit customization.
We'll be pleased to review all aspects of your unique application
and strive to meet your special requirements!

* MODEL NUMBER SELECTION NOTES:
1:
 
Style ES Units feature a 316 grade stainless steel body, including all doors, all grilles, side and rear panels and the top cover; and feature
304 Grade Stainless Steel internal components including the base, condenser compartment partitions and condenser fan shroud.
2: Selection of pressurization, ventilation and filtration options requires assistance during specification development.
3: Limitations apply to the selection of voltage, depending on unit size - consult with a Bebco Sales Associate for more information.
4: Selection of controls and operator interfaces is dependent on many factors and requires assistance during specification development.
5:
 
Limitations apply to the selection of heating elements depending on unit size - consult a Bebco Sales Associate for more information.
Custom Heating Elements must be specified in writing at time of order - consult a Bebco Sales Associate for more information.
6:
 
 
Custom Coil & Fin Materials and Custom Coil Coatings and Case Finishes must be specified in writing at time of order.
- Pleae note Adsil Microguard Coatings are hydrophobic and therefore are not suitable for Evaporator Coils, per Adsil recommendations.
- consult with a Bebco Sales Associate for more information.
7:
 
 
All grilles with exception to anodized aluminum grilles shall feature finish selected under Segment 13E.
If finish is excluded under Segment 13E, galvanneal grilles shall feature a white urethane spray or powder coat finish and stainless steel
grilles shall feature a 2B finish.
 


Bebco Environmental Controls Corporation
Physical Address: 4725 Lawndale Street, La Marque, Texas 77568
Mailing Address: P.O. Box 68 Hitchcock, Texas 77563
Phone: (844) 397-4822     |   Fax: (409) 935-5819
Office Hours:
 8 AM to 5 PM CST, Monday - Friday
Please visit this site for NFPA 496 UL Classified Enclosure Purging Systems:
Best Purging Systems Corporation

  |     |     |  
Terms of Use   |     |   Privacy Policy   |   Terms of Sale
Product Warranties   |   Return Policy & Form   |   Product Registration Form   |   Site Map

Copyright © 2019 – All Rights Reserved      Click the Terms of Use Link above for more information.